[switch工具]hekate 5.1.3&Nyx 0.8.6 下载

• Fixed an issue with booting CFW on < 7.0.0
  A missing check was causing old versions to boot complete stock.
• Fix issues with the usual sd card suspects when doing a warmboot based reboot.
  The SD Card regulator is now disabled on HW init and re-enabled at the appropriate time.
• Support for Atmosphère experimental content.
  Use the fss0experimental=1 key on a boot entry to enable it. For now it's only for NCM.
• Support fatal context version AFE2
• Add more Minerva checks, in case it is paired with old bootloader folder contents.
• Support coreboot.rom chainloading that is not 1MB.
• emuMMC
  • Fixed an issue with HOS 1.0.0. Based on m4xw/emuMMC
  • Nyx v0.8.6
    • Fixed all touchscreen issues. In Nyx and HOS.
      In case you have the issue, you can boot Nyx while pressing VOL- and VOL+.
      This will force a re-calibration of the touchscreen. (The tool version will come later.)
      Do not run this if you don't have issues, it is intended as a mismatch touchscreen calibration fixer
    • Fixed an issue with lvGL heap which was causing hangs
    • Fix Archive bit tool when filepath is bigger than 256 chars.
    • Allow canceling of emuMMC creation
  • 修正了在7.0.0下启动CFW的问题
  •  
  • 缺少检查导致旧版本启动完整库存。
  •  
  • 修正了通常的SD卡疑犯在进行基于热启动的重启时的问题。
  •  
  • SD卡调节器现在在HW init上禁用，并在适当的时间重新启用。
  •  
  • 支持Atmosphère实验内容。
  •  
  • 在引导项上使用FSS0Time= 1键来启用它。现在它只适用于NCM。
  •  
  • 支持致命上下文版本AFE2
  •  
  • 添加更多的米勒娃检查，以防与旧的Bootloader文件夹内容配对。
  •  
  • 支持不是1MB的CoeBoo.ROM链负载
  •  
  • 修复了所有触摸屏问题。在NYX和HOS中。
    如果有问题，可以在按下VOL-和VOL+时启动Nyx。
    这将强制重新校准触摸屏。（工具版本稍后提供。）
    如果没有问题，请不要运行此程序，它将用作不匹配的触摸屏校准修复程序
    修复了导致挂起的lvGL堆问题
    当文件路径大于256个字符时修复存档位工具。
    允许取消emumc创建

下载地址：